LooksGold

Multitool Hair Clip Review: The Barrette That Doubles as a Toolbox

Multitool hair clip review: a stainless steel barrette with a trolley coin, 8mm wrench, three screwdrivers, a ruler and a cutter built into the spring steel. EDC that hides in plain sight on the back of your head.

Alexey Gold··5 Min.
Black stainless steel multitool hair clip with hex wrench cutout, ruler marks and saw edge

Every multitool is a compromise between what fits in a pocket and what gets carried at all. The multitool hair clip solves that compromise by relocating the tools to a place you already accessorize: a spring steel barrette with a hex wrench, three screwdriver profiles, a ruler and a serrated cutter stamped directly into the metal. The idea is not new. Designer Yaacov Goldberg drew it up at the Holon Institute of Technology in Israel over a decade ago as the Leatherdos, the press picked it up with “this hair clip could save your life in an emergency” headlines, and it sold for around ten dollars. The original comes and goes from stock, so what we tested here is the current wave of stamped-steel clones built to the same template.

Labeled diagram of the multitool hair clip showing trolley coin, 8mm wrench, screwdrivers, ruler and cutter functions

The Tools: What Is Actually Stamped Into the Steel

The function map on the listing is mostly honest. The hex cutout at the wide end fits an 8mm (5/16 inch) nut, which covers most bicycle and furniture bolts you will plausibly meet while out and about. The three screwdriver profiles run along the arms: a small flat for eyeglass screws, a large flat for battery covers, and a Phillips notch that bites well enough for one emergency turn.

🏷 Multitool hair clips Browse on Amazon →

The ruler along the outer arm reads in centimeters and stays readable, and the serrated edge cuts cord, zip ties and tape when nothing else is at hand. The wide end doubles as a trolley coin for supermarket carts, which sounds like a gimmick until the one day you stand at an ALDI cart bay without a coin.

Multitool hair clip collage showing the hex wrench cutout gripping a bolt and the clip worn in hair

As a Hair Clip First

None of the tool gimmicks matter if the thing cannot hold hair, so that is the first test. The stamped spring steel grips close to the scalp with fine teeth, and it holds fine to medium hair through a workday without re-clipping. The clamp opens only as wide as its spring allows: very thick or very slippery hair will slide, and anyone with heavy manes ends up using it for half-up styles rather than a full twist-and-clip.

The steel carries a matte black or stainless finish depending on the variant, and the clip is light enough that you forget it is there. That is the quiet genius of the format: EDC you wear instead of carry. The wrench profile, ruler and cutter disappear into an ordinary barrette silhouette.

As a Toolbox Second

The screwdrivers are the function that earns the clip its keep. Tightening a loose eyeglass hinge or opening a watch battery cover with the tool already in your hair feels like a party trick that keeps paying. Leverage is the honest limit: the flat steel arm transmits every newton-meter directly into your fingers, so stubborn screws lose to a real driver every time.

Clean product shot of the black multitool barrette with hex cutout and serrated edge

The cutter handles zip ties and cordage in a pinch, and the ruler has settled measurements arguments at the hardware store counter. The trolley coin is the most regional function: outside cart-coin countries it is just a decorative hole.

Where the Format Falls Short

The gaps show up in order of annoyance. First, the clip is a one-hand operation only when your hair cooperates; thick hair needs two hands and a mirror. Second, the serrated edge sits close to the fingers during ordinary clipping, and you feel the teeth during long styling sessions. Third, the tool steel is ordinary stamped stainless: it handles rain and shower steam, but the black coating on dark variants chips at the pivot rivet within weeks of daily use.

Airport security is the non-obvious dealbreaker. Screeners do not read the barrette silhouette, they read a serrated steel edge, and the clip regularly ends up in the bin. Wear it to the office, not onto a plane.

Who should buy a multitool hair clip?

Commuters and cyclists who already carry nothing. The 8mm wrench and flat drivers cover the small failures of everyday hardware, and the clip weighs less than any pocket multitool.

People with fine to medium hair who want one accessory that does two jobs. The holding power is real, and the tool functions cost nothing when unused.

Minimalist EDC builders looking for the last 20 grams. As a fifth-layer backup tool it is unbeatable; as a primary multitool it will disappoint anyone who expects Leatherman-grade capability from ten grams of stamped steel.

Verdict

✅ Pros:

  • Six real functions stamped into one 10-gram barrette
  • Holds fine to medium hair securely through a full day
  • Screwdrivers genuinely useful for glasses, watches and battery covers
  • 8mm hex cutout fits the most common everyday bolt size
  • EDC that lives in your hair, not your pocket
  • Available in black and stainless, typically under 15 euros

❌ Cons:

  • No leverage for stubborn screws; fingers take the torque
  • Spring clamp too narrow for very thick hair
  • Serrated edge feels uncomfortable during long styling
  • Black finish chips at the rivet with daily use
  • Regularly confiscated at airport security
  • Original Leatherdos frequently out of stock; clones vary in steel quality

🏷 Compare mini multitools Mini EDC Multitools →


3/5Bewertung

FAQ

What tools does a multitool hair clip actually include?

The stamped spring steel barrette carries a hex wrench cutout that fits 8mm nuts, three screwdriver profiles (small flat, large flat, Phillips), a centimeter ruler along one arm, a serrated cutting edge for cord and tape, and a bottle opener or trolley coin profile at the wide end. All of it is cut into the steel itself, so nothing folds, hinges or rattles.

Can a hair clip really work as a screwdriver?

For light duty, yes. The rigid spring steel arm gives enough leverage for firmly seated screws on glasses, laptops, battery covers and hose clamps. Stripped, rusted or overtightened screws still need a real driver with a proper handle, because the clip has no grip pad and the flat steel digs into fingers under high torque.

Does the multitool hair clip hold thick hair securely?

It holds fine to medium hair well because the teeth grip close to the scalp. Very thick or slippery hair can slide, since the clip opens only as wide as its spring allows. People with heavy manes mostly use it as a half-up accessory rather than a full-head holder.

Will the multitool hair clip pass airport security?

Probably not. Security screeners see a steel clip with a cutting edge and a wrench profile, and the odd stamped shape reads as a blade rather than a barrette. Treat it as a bag or keychain tool for travel days, not a hair accessory you wear through the checkpoint.

Ähnliche Tests

·

Caseology Vault im Test: Das AirTag Case mit echtem Karabiner

Caseology Vault Test: AirTag Hülle mit integriertem Karabiner, kratzresistentem Polycarbonat-Gehäuse und sicherem Clip-Halter für AirTag 1 und 2. Schlüsselbund-Tracking, das Schlüssel, Taschen und Hundehalsbänder überlebt.

Alexey Gold · 3 min